We make Tongkat Ali extract (Eurycoma longifolia) and press it into tablets in the same plant, so the powder never changes hands between the drum and the tablet press. What follows is that chain, handoff by handoff, with the checkpoints a buyer should place when auditing a supplier.
1. The problem is usually the handoff, not the extract
Most Tongkat Ali tablets sold in the US and EU are built by two companies: one extracts, another compresses. The model is fine until a lot fails, and then the question of whose batch it was has no clean answer. In practice the failures cluster in four places:
Bulk density and particle size do not match the press. The extract runs cleanly in the supplier's hopper and bridges in yours. Tablet weight drifts, and the checkweigher rejects what you have already granulated.
The extract takes on moisture. Tongkat Ali extract is hygroscopic and dark. Once it picks up water it sticks to the punches, hardness falls away and the core darkens.
Assay drops after the COA, not before it. The loss usually happens in wet-granulation drying rather than in the press, which is why re-testing the incoming drum shows nothing wrong.
Two COAs, two methods. The numbers never line up, neither party can prove anything, and the cost lands on the buyer.
2. Five handoffs we control
Each of these is a point where the material changes state. Each has an owner, a record and a test.
Root in, extract released. Every lot of Tongkat Ali root is sampled on arrival and tested for moisture, eurycomanone content by HPLC, heavy metals and microbiological load. Material that passes goes into storage. A lot that fails is recorded as non-conforming and returned to the supplier — it is not blended away.
Extraction and purification. Counter-current ultrasonic extraction, mixed-bed continuous ion exchange, nanofiltration and ceramic membrane separation, then spray drying. Temperature is held low through concentration and drying, because eurycomanone sits in the heat-sensitive fraction. Output is Eurycomanone 1%, Eurycomanone 2%, or a 100:1 extract.
Powder characterisation before the press. Bulk density, flow and particle size are checked against the tooling, not against a catalogue. Where the extract load is high we granulate instead of direct-compressing: a granulated mass flows better, holds hardness, and does not segregate the actives.
Compression, and coating where the pack needs it. Tablet weight variation, hardness, friability and disintegration time are the four numbers that decide release. Sticking and picking are corrected in the formulation — lubricant level, granulate moisture — rather than by slowing the press down. If your market is humid, a film coat keeps moisture out of the core; tell us at quotation stage whether your pack calls for one.
Release and traceability. The COA reports assay by HPLC alongside heavy metals (Pb, Cd, As, Hg), microbiological count, moisture and disintegration. Every batch number traces back to the root lot, the process record and the retained sample. Packaging runs in a 100,000-grade purification workshop.

3. What the 2023 order actually looked like
In January 2023 a US buyer who had already bought our extract — and inspected the plant — placed a finished-product order. The goods shipped on 8 April 2023, packed under the buyer's own label. That lot was filled as capsules. This article uses the tablet format because that is where the technical risk concentrates, and because both run through the same solid-dosage workshop.
The numbers we can stand behind: extract MOQ 1 kg, dispatch of standard specifications in 3–7 days, and a range from 100:1 to Eurycomanone 2%. Tablet and capsule MOQ and lead time depend on tooling and pack format, so ask for your own case rather than assume ours.
The plant behind that order: ten production lines plus the first fully automatic extraction line in Northwest China, a 9,000 m² GMP-standard workshop, the 100,000-grade purification workshop for packaging, and a laboratory run with Northwest University equipped for HPLC, GC-HS and IR. Accreditation covers Organic, ISO 9001, HACCP, Kosher and Halal, plus SC in China. Products reach more than 60 countries and regions.
Send your target specification, market and pack format to sales@kh-health.com. We will reply with the COA of a recent batch and the process route we would propose. The production page lists the lines, the quality page describes how a lot is released, and samples can be arranged through contact before you commit to a volume.