From Sample to Production Run: A Custom Vitamin Gummy Project for a Canadian Client

From Sample to Production Run: A Custom Vitamin Gummy Project for a Canadian Client

Date:2026.10.26 ViewCount:

Custom vitamin gummies built to a buyer's own flavour, size, shape and packaging are a different job from filling drums with extract. What decides whether the order runs smoothly is rarely the recipe — it is whether what you approved as a sample is what the production line can repeat.


1. Where a custom gummy actually fails

Custom gummies seldom fail on the formula. They fail in the gap between the sample and the production run. A sample that tastes right on bench equipment still has to set evenly across a full tray, hold piece weight at line speed, come through drying without losing the heat-sensitive fraction of the active, and release from the mould without deforming. A buyer holding a quotation, a photo and an MOQ cannot see any of that, and usually finds out after the deposit is paid.


2. Four decisions before anything is sampled

Flavour, piece size, shape and packaging format. Each one moves the tooling, the drying profile or the packing line, so all four are settled before a sample exists — and MOQ and delivery schedule are settled in the same exchange, because a lead time quoted against an unfixed shape is not a lead time, it is a guess.


In this project the client came in through the website in November 2023 with a brief for a personalised vitamin gummy and asked for a sample first. The four specifications were agreed, minimum order and schedule were discussed, and only then was the sample scheduled.


3. The sample is made on the line

The sample is produced on the production line, not on bench equipment, and that is deliberate. A line sample passes through the same depositing, setting, drying and demoulding steps as the commercial batch, so what the client tastes is what the run will produce — and any correction is a correction of line settings rather than of a kitchen recipe. Where a shape or a flavour system needs more work, it is re-run on the same line until the client's specification is met.


Clients who want to see the plant before committing do not have to wait for a site visit: we run online tours of the production facilities, the certification procedures and the QC system.


4. The active ingredient can be ours

Most gummy suppliers buy their actives. We make botanical extracts, so the active portion of a gummy can come from our own extraction rather than from a third-party drum: counter-current ultrasonic extraction, reverse-osmosis water, nanofiltration and ceramic membrane separation, then spray drying or freeze drying depending on how heat-sensitive the fraction is. The point is not price — it is that the material going into the gummy carries the same batch number, the same retained sample and the same release tests as the drums we ship to supplement brands.


The plant behind it: a 9,000 m² GMP-standard workshop, a Class 100,000 purification workshop used for packaging, a standard solid-dosage workshop for capsules, tablets and granules, ten production lines, and the first fully automatic extraction line in northwest China. The laboratory is an 800 m² research and teaching building run with Northwest University, equipped with HPLC, GC-HS and IR, with a separate independent laboratory for third-party testing.


Testing runs forward from the raw material. Incoming material is sampled and tested item by item for moisture and content and released to storage only on a passing report; a failing lot is logged as non-conforming and returned rather than blended away. Intermediates are checked in process so a run can be corrected inside the batch. Finished goods are sampled from the homogenised blend, and every released batch keeps a retained sample and a batch number that traces back to the raw material lot and the process record.


5. After approval: documents and release

The sample was tested by the client against their own specification and approved — their assessment was that the requirement could be met, and that we could hold a unique specification. Approval then moves to a production run on the same line, the same specification sheet and the same document set.


What travels with the goods is what a customs broker and an incoming QA team both ask for: COA, MSDS and certificate of origin, plus the batch record behind them. The facility holds HACCP, ISO 9001, KOSHER, HALAL, ORGANIC and SC (the China production licence) certification, and our products reach more than 60 countries and regions.


We do not publish one fixed lead time for custom gummies, because the honest figure depends on shape, flavour system and packing format — a mould that has to be cut runs to a different schedule than one that already exists. Once the four specifications are fixed, the sample date and the production date are given in writing, and that is the date we plan to.


If you are developing a gummy, send the four specifications and your monthly volume. We will come back with MOQ, the sample plan and a production date — and you can look at the facility and the QC system before anything is committed.